Interior plantation shutters are most
commonly built with a 2 ½,
3 ½, or 4 ½ inch movable louver. They are also available
with a smaller 1 7/8 inch louver or a larger 5 ½ inch louver.
Plantation shutter panels are generally built with 1 1/8 inch stock.
Plantation shutters are available in two louver profiles. The
first is elliptical in shape, in which the louver is thicker in
the middle and tapers to the front and back. The second is flat,
in which the louver thickness is consistent front to back. An elliptical
louver is stronger than the alternative flat louver. Most shutters
today are made with elliptical louvers, but flat louvers are made
upon request.
Individual plantation shutter panels usually span between 8 and
36 inches. The number of panels used on an individual window depends
on the width of the window. As a rule of thumb, we suggest dividing
the shutter unit into the same number of panels as the window.
If your window is divided into three, for example, we recommend
using three shutter panels.
If your window is not divided into sections, we recommend using
as few panels as practical for maximum visibility and light. If
your window is less than 36 inches, consider using a single panel
that hinges to either the left or right side of the window.
Plantation Shutters are considered more contemporary than traditional
shutters (link). While there is still a demand for traditional
shutters, modern homes are being built with larger rooms and larger
windows. Plantation shutters are the perfect window covering to
complement this type of architecture.
Plantation shutters allow the homeowner complete privacy and a
near-dark room. The louvers can be rotated partially open to block
direct sunlight yet allow enough light to brighten the room. This
is a great way to protect furniture and carpet from fading over
time. When fully open, plantation shutters provide great visibility
and maximum light.
|
